Description

Description

Diamond Attachment Instructions

Note: The model has been disassembled and packed. Be sure to attach all the diamonds before assembling.
1. Prepare the appropriate drill, glue, and drill pen. Drills are generally 3mm and 4mm in diameter. If one size isn’t enough, use a small drill to fill in some gaps for aesthetic reasons and to minimize gaps. The glue is quick-drying, so apply the diamonds and glue them in place within 2 minutes.

2. Apply a small amount of glue to the desired area first, then use the drill pen to attach the diamonds one by one. Be sure to arrange them neatly, either horizontally or vertically. You can also apply the diamonds in a circular pattern, as long as they are symmetrical.
Be careful not to apply too much glue at once, especially if you’re a beginner, to avoid glue sticking to the diamonds and affecting their gloss. (You should usually start attaching the diamonds around the nose, mouth, and eyes, then work your way up to larger areas.)
3. After attaching everything, let it sit for about 3 hours. This will ensure the glue is fully cured for a more secure fit.

Product accessories